This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 4 title
 

If You Think You Understand Rivets, Then This Might Change Your Mind

What You Should Know About Rivets

One of the oldest forms of fasteners for metal that is being used today as another form of rivet. This humble rivet has been seen in service through the entire World war in its construction of boats and airplanes, yet until this moment no modern replacement has been made.

Originally the rivets are used in making ships, and other huge structures like the bridges, they are put together using a very hot rivets, this is where the rivet is being heated until it was red hot, and then placed in the hole to join the two kinds of iron steel together.

It was then being held in pace by the man with a metal tongues while other is hit on the end of the rivet to Blind each hole. Then having it cooled down with the rivet that could contract, pulling the two pieces of the metal it was then joining together.

Due to the heat and the hammering, this is very dangerous and without complications as to how to get the hot rivers to where it is needed to be and while it is hot. An early example of this is the black and white pictures of men in the year 1900s making a skyscrapers in New York and it cant be very easy in getting hot rivets. These days the majority of those rivets in use are cold rivets that are all relatively small in size, as ships have steel hulls welded all together for more strength and even faster construction.

These days the majority of the rivets are using cold rivets that are small in size as ships have steel hulls being welded together for a much stronger strength as well as construction. The bridges are now joined together with fasteners and not riveted. The cold modern rivets are now easily used by the home DIY person, you can buy the pop riveting in any DIY store.

These pop rivets are placed in the hole that you must go through and the gun is attached using the moderate pressure the rivets will tighten and the riveting gun crops off the excess part of the rivet. These kind of rivets are now used in the aircraft industry to both home built aircraft kits as well as Boeing 747s, the principle is identical for both as the problem is identical too.

How can one fasten two pieces of curved aluminum? You can not weld an aluminum enough to even make it sustainable and strong enough, and thus we rely on rivets as a fastener to even hold each piece together. This simply shows that rivets are proven to be useful and timeless thing to fasten two things. Imagine how can we survive if we do not have rivets to fasten things.

Source: saddlery